Supermicro X10DRL-i Motherboard DP Xeon E5-2600v3 LGA2011-3 DDR4 SuperDOM SATA3 RAID 1GbE ATX
Supermicro X10DRL-i Motherboard DP Xeon E5-2600v3 LGA2011-3 DDR4 SuperDOM SATA3 RAID 1GbE ATX
Product Code: MB-SM-X10DRLI
Manufacturer: Supermicro
Your Price: $406 / Each
  • Features
  • Reviews

Supermicro Intel Server Board

ATX, Cost Effective

Manufacturer Part Number: MBD-X10DRL-i

RoHS Compliant

 

Specifications:

Processor: 2 x E5-2600v3; QPI up to 9.6GT/s; TDP up to 145W

Chipset: C612 Chipset

Form Factor: ATX 12"x10"

Memory: Up to 512GB Registered ECC, DDR4-2133MHz in 8 DIMM slots

Expansion: 3 PCI-E 3.0 x8; 1 PCI-E 3.0 x16; 1 PCI-E 3.0 x4 (in x8 slot); 1 PCI-E 2.0 x4 (in x8 slot)

Onboard RAID: 10 SATA3 (6 Gbps) ports; RAID 0, 1, 5, 10

Onboard LAN: Dual LAN with Intel i210 Gigabit Ethernet Controller

Onboard VGA: AST2400VGA

Other Onboard I/O Devices: 2 ports SuperDOM; 1 SATA DOM power connector ; TPM module header; 2 COM port2 (1 rear, 1 header)
 

Product SKUs
MBD-X10DRL-i -O
  • X10DRL-i (Standard Retail Pack)
MBD-X10DRL-i -B
  • X10DRL-i (Bulk Pack)
 
Physical Stats
Form Factor
  • ATX
Dimensions
  • 12" x 10" (30.48cm x 25.4cm)
 
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP **)
  • Dual Socket R3 (LGA 2011)
Cores / Cache
  • Up to 18 Cores / Up to 45MB Cache
System Bus
  • QPI up to 9.6 GT/s
Note ** Motherboard supports this maximum TDP. Please verify your system can thermally support.
 
System Memory
Memory Capacity
  • 8x 288-pin DDR4 DIMM sockets
  • Up to 512GB ECC LRDIMM, 256GB ECC RDIMM
Memory Type
  • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
  • RDIMM: 32GB, 16GB, 8GB, 4GB
  • LRDIMM: 64GB, 32GB
Memory Voltage
  • 1.2 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
Chipset
  • Intel® C612 Express chipset
SATA
  • I-SATA 4 and I-SATA 5 support SATA DOM
  • SATA3 (6Gbps); RAID 0, 1, 5, 10
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC
Network Controllers
  • Intel® i210 Gigabit Ethernet controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8211E PHY (dedicated IPMI)
Video
  • ASPEED AST2400 BMC
 
Input / Output
SATA
  • 10x SATA3 (6Gbps) ports
LAN
  • 2x RJ45 Gigabit Ethernet LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 4x USB 3.0 ports (2 rear + 2 via header)
  • 5x USB 2.0 ports (2 rear + 2 via header + 1 Type A)
Video
  • 1x VGA port
Serial Port / Header
  • 2x Fast UART 16550 port / 1 Header
DOM
  • DOM (Disk on Module) power connector
TPM
  • 1x TPM 1.2 20-pin Header
Chassis (Optimized for X10DRL-i )
2U Chassis
3U Chassis
Mid-Tower
Tower / 4U Rackmount
Important Chassis Notes
  • To support the new generation Intel® Xeon® processor-based motherboards,Revision M chassis is recommended. Please talk to your sales representative for details.
 
SuperServer(s) with X10DRL-i
Model(s)
 
Expansion Slots
PCI-Express
  • 3 PCI-E 3.0 x8
  • 1 PCI-E 3.0 x16
  • 1 PCI-E 3.0 x4 (in x8)
  • 1 PCI-E 2.0 x4 (in x8)
 
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.3
  • ACPI 3.0 / 4.0
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI 2.3.1
 
Management
Software
Power Configurations
  • ACPI Power Management
  • Power-on mode for AC power recovery
 
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, Memory Voltages.
  • 5 Phase-switching voltage regulator
FAN
  • 8x 4-pin fan headers (up to 8 fans)
  • 8x fans with tachometer monitoring
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 8x Fan Connectors
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED
  • Suspend static indicator LED
  • UID/Remote UID
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • RoHS, Halogen Free
  • Dual Cooling Zones
 
Operating Environment
Operating Temperature Range
  • 10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range
  • -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
  • 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
  • 5% - 95% (non-condensing)
 

 

This product is not refundable due to manufacturer return policy. We only replace or repair defective product by RMA procedure.

Login To Add Review
There is no reviews, be first to review!