Supermicro Intel Products
SuperServer 7047GR-TPRF-FM475 for GPU-Optimized Supercomputing Server Solutions

Mfg. Model Number:
Supermicro SYS-7047GR-TPRF-FM475, dark gray.
RoHS Compliant

Features & Benefits:
Based on the new generation Intel® Xeon® Processor E5-2600/E5-1600 series, Supermicro new GPU Computing Servers are targeted for the Mission-critical app, enterprise server, oil & gas, financial, 3D rendering, chemistry, Astrophysics ... at HPC environments with 24/7 Mission Critical requirements.

Specifications:
Key Factor
Server Type: Tower/4U Rackmount
CPU Socket: 2
GPU Included: 4x M2075
Memory Dimms: 16
HDD Bays: 8x 3.5"
Expansion Slots: 7
Power Supply: 1620W (1+1) Redundancy

Form Factor
Chassis: Supermicro SC747BTQ Tower/4U Rackmount Chassis
Dimensions (W x H x D): 7.0" (178mm) x 18.2" (462mm) x 26.5" (673mm)
Motherboard
Supermicro X9DRG-QF, Proprietary 15.2" x 13.2" (38.6cm x 33.5cm).
Processor
Dual sockets of Intel® R, LGA 2011.
Support Intel® QPI system bus speed up to 8 GT/s
Support Intel® 64-bit processor:
 -  Intel® 8-core new generation processor Xeon® E5-2600 series (Sandy Bridge-EP)
Supermicro active CPU cooling kit included
Graphics Processor
4x NVIDIA Tesla M2075 Fermi GPU cards installed,
System Memory
16x DDR3 240-pin DIMM sockets
Four-channel memory bus per processor
Support up to 512GB of ECC Registered DDR3-1600/1333/1066/800MHz memory
Support up to 192GB of un-Buffered DDR3-1600/1333/1066/800MHz memory
Support 1.5V & 1.35V memory voltage
Integrated On-Board Device
• Chipset
Intel® C602 chipset
• SATA Controller
Intel® C602 SATA3 6.0Gbps Controller
Support two SATA3 6.0Gbps ports and eight SATA2 3.0Gbps ports
Support SATA3 6.0Gbps RAID 0, & 1.
Support SATA2 3.0Gbps RAID 0, 1, 5, & 10.
• IPMI
Renesas SH7757 BMC
Support Intelligent Platform Management Interface v.2.0
Support IPMI 2.0 with virtual media over LAN and KVM-over-LAN
• Network Controller
Intel® i350 dual-port Gigabit Ethernet Controller
Support 10BASE-T, 100BASE-TX, and 1000BASE-T with RJ-45 output.
Virtual Machine Device Queues reduce I/O overhead
One Realtek RTL8201N networking PHY for IPMI dedicated LAN
• Graphics
Matrox G200eW graphic controller
Expansion Slot
Four double-width PCI-E 3.0 x16 slots for GPU cards
Two PCI-E 3.0 x8 slots
One PCI-E 2.0 x4 slot
Input/Output
Serial ATA: 2x SATA3 6.0Gb ports, 8x SATA2 3.0Gb ports.
LAN: 2x RJ-45 ports for GbE LAN, 1x RJ-45 port for IPMI Dedicated LAN.
USB: 9x USB 2.0 ports (4x rear, 4x via header, 1x Type A)
Graphics: 1x D-Sub 15-Pin VGA port 
Serial Port: 1x Fast UART 16550 port, 1x Header.
Front Panel
Buttons: Power On/Off, System Reset.
LEDs: Power, Hard drive, Networking, System Overheat/Fan fail/UID.
Ports: 2x USB 2.0 Ports
Drive Bay
8x external 3.5" drive bays with HDD hot-swap tray
Supermicro SAS/SATA backplane with SES2
1x 90° rotatable storage module of 3x 5.25" drive bays for peripheral device
1x 3.5" fixed drive bay for peripheral device
System BIOS
128Mb SPI Flash EEPROM with AMI® BIOS
Power Supply
1620W (1+1) redundant power supply with PMBus
High-efficiency with 80 Plus Platinum Level certified
AC Input:
 -  100 - 120V, 50 - 60Hz, 12-10 Amp for 1000W Output.
 -  120 - 140V, 50 - 60Hz, 12-10 Amp for 1200W Output.
 -  180 - 240V, 50 - 60Hz, 10.5-8 Amp for 1620W Output.
System Cooling
Four 92mm x 38mm 4-pin Cooling Fans with PWM control in the middle
Four 80mm x 38mm 4-pin Exhaust Cooling Fans with PWM control at rear