|
|
|
|
Tyan S2518GN Thunder LE-T System Board Pentium III Dual-PGA370 PC133 SDRAM IDE LAN PCI ATX |
|
|
|
|
|
|
Product Code: MB-TY-S2518GN
-----------------------------------------------------------
Product Description:
Tyan Intel Solutions THunder LE-T System Board
Mfg. Part Number:
Tyan S2518GN
Features & Benefits:
The Thunder LE-T was specifically designed for the Internet infrastructure. It supports two CPUs; either the Pentium III processor, or the Pentium III processor DP. With its high-performance ServerWorks chipset, 64-bit PCI bus, and integrated network, storage and video controllers, the Thunder LE-T provides superior performance and a wealth of integrated features. The Thunder LE-T's most intriguing feature is its form factor. Utilizing angled memory sockets and a highly integrated design, the Thunder LE-T is the perfect choice for today's 1U/2U servers.
Specifications:
Processor:
Dual ZIF PGA370 Sockets
Support Intel Pentium III FC-PGA with FSB 133/100 MHz Chipset:
ServerWorks ServerSet III LE Chipset, SMC FDC37B787 Super I/O Chip.
Memory:
Four 25-degree angled 3.3V Dinn sockets
Support 4 GB of PC133/100 ECC Registed SDRAM.
Expansion Slots:
One 64-bit 66MHz (3.3-volt) PCI slot and one 64-bit 66MHz (5-volt) PCI slot.
PCI riser card required when installed in 1U/2U
BIOS:
AMI BIOS on 4 MB Flash
I/O:
One floppy connector
Two 9-pin 16550-based serial ports (one via optional cable);
one 25-pin SPP/ECP/EPP parallel port via optional cable
Four USB Ports
PS/2 Mouse and Keyboard Ports
IDE
Dual channel master mode, support four Enhanced IDE devices. Support for DMA33 IDE and ATAPI-compliant devices.
LAN:
Two Intel 82559 LAN controllers, Support 10/100Mbps per port.
Graphics:
ATI Rage XL PCI Accelerator with 4 MB SDRAM
Form Factor:
ATX footprint (12" x 9.6", 304.8mm x 243.84mm)
One 20-pin ATX power connector (250W+)
Regulatory:
FCC DoC, European CE
This product is not refundable due to manufacturer return policy. We only replace or repair defective product by RMA procedure.
|
|
|
|
