|
|
|
|
A+ 2022TG-HiBQRF 2U 4-Node Server 2-Way Opteron 6100 Socket G34 12-Core DDR3 3.5-in SATA2 Hot-Swap R1400W AS-2022TG-HIBQRF |
|
|
|
|
More Product Pictures |
Product Code: SY-SM-222TGHIBQ
-----------------------------------------------------------
Product Description:
Supermicro AMD Products
A+ Server 2022TG-HiBQRF for 2U Hot-pluggable 4-Node server solutions
Mfg. Model Number:
Supermicro AS-2022TG-HIBQRF, black color.
RoHS Compliant
Specifications:
Key Factors Per Node
CPU Sockets: 2
Memory Dimms: 16
HDD Bays: 3
Infiniband Connectors: 1
Expansion Slots: 1
Power Supply: Redundant 1400W (shared)
Form Factor
Chassis: Supermicro SC827H 2U Rackmount Chassis
Dimensions:
Height 3.47" (88mm) x
Width 17.25" (438mm) x
Depth 28.5" (724mm)
Support four hot-pluggable systems (nodes)
MCP-290-00053-0N 2U mounting rail kit included
Motherboard Per Node
Supermicro MBD-H8DGT-HIBQF
Processor Per Node
Dual Sockets of G34, 1944-pin.
Support HT3.0 link speed up to 6.4 GT/s
Support 12-Core/8-Core AMD Opteron™ 6100 processor series (Magny-Cours)
Supermicro SNK-P0042P cooling kits included
System Memory Per Node
16x DDR3 240-pin DIMM sockets
Quad channel memory bus
Support up to 256GB of ECC Registered DDR3-1333/1066/800MHz memory, or
Support up to 64GB of Unbuffered ECC/non-ECC DDR3-1333/1066/800MHz memory
Memory should be populated equally in adjacent memory banks for dual CPU
Support 1.35V or 1.5V Memory Voltage
Integrated On-Board Device Per Node
Chipset:
AMD SR5670 + SP5100 chipset
SATA:
AMD SP5100 SATA 3.0Gbps Controller
Support six SATA ports and RAID 0, 1, & 10.
IPMI:
Winbond® WPCM450 BMC
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM over LAN support
Infiniband:
Mellanox ConnectX QDR Infiniband 40Gbps Controller with one QSFP connector
Network Controller:
Intel® 82576 dual-port Gigabit Ethernet Controller
Support 10BASE-T, 100BASE-TX, and 1000BASE-T with RJ-45 output.
One Realtek RTL8201N PHY for IPMI dedicated LAN
Graphics:
Matrox G200 16MB DDR2 graphics controller
Super I/O:
Winbond® W83527 chip
Expansion Slot Per Node
PCI-Express: One low-profile PCI-E 2.0 x16 slot
RSC-R1U-E16R-O-P 1U riser card included
Input/Output Per Node
Serial ATA: Six SATA2 3.0Gb/s Ports
LAN: Two RJ-45 ports for GbE LAN, one RJ-45 port for IPMI Dedicated LAN.
USB: Total five USB 2.0 ports (2x rear, 2x header, 1x type A)
Graphics: One VGA port
Serial Port: One Fast UART 16550 serial port, one serial header.
Front Panel Per Node
Buttons: Power On/Off,
UID buttons.
LEDs: Power,
UID, Networking,
System Overheat/fan fail/power fail LEDs.
Ports: N/A
Drive Bay Per Node
Three 3.5" drive bays with hot-swap HDD tray. Enterprise SATA HDD recommended.
Supermicro BPN-SAS-827B SAS/SATA backplane included (shared)
System BIOS Per Node
16Mb SPI Flash EEPROM with AMI® BIOS
Power Supply (shared)
Redundant (1+1) 1400W power supply with PMBus
High-efficiency with 80 PLUS Gold Certified
AC Input
- 1100W: AC 100 - 140V, 50 - 60Hz, 9.5 - 13.5 Amp.
- 1400W: AC 180 - 240V, 50 - 60Hz, 7.0 - 9.5 Amp.
System Cooling Per Node
One 80mm x 38mm 9500RPM 4-pin Cooling Fan with PWM control
|
|
|
|
